lspci
NAME
lspci - list all PCI devices
SYNOPSIS
lspci
[options]
DESCRIPTION
lspci
is a utility for displaying information about all PCI buses in the system and
all devices connected to them.
By default, it shows a brief list of devices. Use the options described
below to request either a more verbose output or output intended for
parsing by other programs.
If you are going to report bugs in PCI device drivers or in
lspci
itself, please include output of "lspci -vvx" or even better "lspci -vvxxx"
(however, see below for possible caveats).
Some parts of the output, especially in the highly verbose modes, is probably
intelligible only to experienced PCI hackers. For the exact definitions of
the fields, please consult either the PCI specifications or the
header.h
and
/usr/include/linux/pci.h
include files.
Access to some parts of the PCI configuration space is restricted to root
on many operating systems, so the features of
lspci
available to normal users are limited. However,
lspci
tries its best to display as much as available and mark all other
information with
<access denied>
text.
OPTIONS
-v
Be verbose and display detailed information about all devices.
-vv
Be very verbose and display more details. This level includes everything deemed
useful.
-vvv
Be even more verbose and display everything we are able to parse,
even if it doesn't look interesting at all (e.g., undefined memory regions).
-n
Show PCI vendor and device codes as numbers instead of looking them up in the
PCI ID list.
-nn
Show PCI vendor and device codes as both numbers and names.
-x
Show hexadecimal dump of the standard part of the configuration space (the first
64 bytes or 128 bytes for CardBus bridges).
-xxx
Show hexadecimal dump of the whole PCI configuration space. It is available only to root
as several PCI devices
crash
when you try to read some parts of the config space (this behavior probably
doesn't violate the PCI standard, but it's at least very stupid). However, such
devices are rare, so you needn't worry much.
-xxxx
Show hexadecimal dump of the extended (4096-byte) PCI configuration space available
on PCI-X 2.0 and PCI Express buses.
-b
Bus-centric view. Show all IRQ numbers and addresses as seen by the cards on the
PCI bus instead of as seen by the kernel.
-t
Show a tree-like diagram containing all buses, bridges, devices and connections
between them.
-s [[[[<domain>]:]<bus>]:][<slot>][.[<func>]]
Show only devices in the specified domain (in case your machine has several host bridges,
they can either share a common bus number space or each of them can address a PCI domain
of its own; domains are numbered from 0 to ffff), bus (0 to ff), slot (0 to 1f) and function (0 to 7).
Each component of the device address can be omitted or set to "*", both meaning "any value". All numbers are
hexadecimal. E.g., "0:" means all devices on bus 0, "0" means all functions of device 0
on any bus, "0.3" selects third function of device 0 on all buses and ".4" shows only
the fourth function of each device.
-d [<vendor>]:[<device>]
Show only devices with specified vendor and device ID. Both ID's are given in
hexadecimal and may be omitted or given as "*", both meaning "any value".
-i <file>
Use
<file>
as the PCI ID list instead of /usr/share/misc/pci.ids.
-m
Dump PCI device data in a backward-compatible machine readable form.
See below for details.
-mm
Dump PCI device data in a machine readable form for easy parsing by scripts.
See below for details.
-D
Always show PCI domain numbers. By default, lspci suppresses them on machines which
have only domain 0.
-M
Invoke bus mapping mode which performs a thorough scan of all PCI devices, including
those behind misconfigured bridges etc. This option is available only to root and it
gives meaningful results only if combined with direct hardware access mode (otherwise
the results are identical to normal listing modes, modulo bugs in lspci). Please note
that the bus mapper doesn't support PCI domains and scans only domain 0.
--version
Shows
lspci
version. This option should be used stand-alone.
PCILIB AND ITS OPTIONS
The PCI utilities use PCILIB (a portable library providing platform-independent
functions for PCI configuration space access) to talk to the PCI cards. It supports
the following access methods:
linux_sysfs
The
/sys
filesystem on Linux 2.6 and newer. The standard header of the config space is available
to all users, the rest only to root. Supports extended configuration space and PCI domains.
linux_proc
The
/proc/bus/pci
interface supported by Linux 2.1 and newer. The standard header of the config space is available
to all users, the rest only to root.
intel_conf1
Direct hardware access via Intel configuration mechanism 1. Available on i386 and compatibles
on Linux, Solaris/x86, GNU Hurd and Windows. Requires root privileges.
intel_conf2
Direct hardware access via Intel configuration mechanism 2. Available on i386 and compatibles
on Linux, Solaris/x86 and GNU Hurd. Requires root privileges. Warning: This method
is able to address only first 16 devices on any bus and it seems to be very
unreliable in many cases.
fbsd_device
The
/dev/pci
device on FreeBSD. Requires root privileges.
aix_device
Access method used on AIX. Requires root privileges.
nbsd_libpci
The
/dev/pci0
device on NetBSD accessed using the local libpci library.
By default, PCILIB uses the first available access method and displays no debugging
messages, but you can use the following switches to control its behavior:
-P <dir>
Force use of the linux_proc access method, using
<dir>
instead of /proc/bus/pci.
-H1
Use direct hardware access via Intel configuration mechanism 1.
-H2
Use direct hardware access via Intel configuration mechanism 2.
-F <file>
Extract all information from given file containing output of lspci -x. This is very
useful for analysis of user-supplied bug reports, because you can display the
hardware configuration in any way you want without disturbing the user with
requests for more dumps.
-G
Increase debug level of the library.
MACHINE READABLE OUTPUT
If you intend to process the output of lspci automatically, please use one of the
machine-readable output formats
(-m,
R -vm ,
R -vmm )
described in this section. All other formats are likely to change
between versions of lspci.
All numbers are always printed in hexadecimal. If you want to process numeric ID's instead of
names, please add the
-n
switch.
Simple format (-m)
In the simple format, each device is described on a single line, which is formatted as parameters suitable for passing to a shell script, i.e., values separated by whitespaces, quoted and escaped if necessary. Some of the arguments are positional: slot, class, vendor name, device name, subsystem vendor name and subsystem name (the last two are empty if the device has no subsystem); the remaining arguments are option-like:I -r rev
Revision number.
I -p progif
Programming interface.
The relative order of positional arguments and options is undefined.
New options can be added in future versions, but they will always
have a single argument not separated from the option by any spaces,
so they can be easily ignored if not recognized.
Verbose format (-vmm)
The verbose output is a sequence of records separated by blank lines. Each record describes a single device by a sequence of lines, each line containing a single `tag: R value ' pair. The tag and the value are separated by a single tab character. Neither the records nor the lines within a record are in any particular order. Tags are case-sensitive.The following tags are defined:
Slot
The name of the slot where the device resides
([domain:]bus:device.function).
This tag is always the first in a record.
Class
Name of the class.
Vendor
Name of the vendor.
Device
Name of the device.
SVendor
Name of the subsystem vendor (optional).
SDevice
Name of the subsystem (optional).
Rev
Revision number (optional).
ProgIf
Programming interface (optional).
New tags can be added in future versions, so you should silently ignore any tags you don't recognize.
Backward-compatible verbose format (-vm)
In this mode, lspci tries to be perfectly compatible with its old versions. It's almost the same as the regular verbose format, but the Device tag is used for both the slot and the device name, so it occurs twice in a single record. Please avoid using this format in any new code.FILES
/usr/share/misc/pci.ids
A list of all known PCI ID's (vendors, devices, classes and subclasses). Maintained
at http://pciids.sourceforge.net/, use the
update-pciids
utility to download the most recent version.
/usr/share/misc/pci.ids.gz
If lspci is compiled with support for compression, this file is tried before pci.ids.
/proc/bus/pci
An interface to PCI bus configuration space provided by the post-2.1.82 Linux
kernels. Contains per-bus subdirectories with per-card config space files and a
devices
file containing a list of all PCI devices.
SEE ALSO
setpci(8),
update-pciids(8)
AUTHOR
The PCI Utilities are maintained by Martin Mares <mj@ucw.cz>.
