- NAME
- SYNOPSIS
- DESCRIPTION
- OPTIONS
- FURTHER DOCUMENTATION
- GIT COMMANDS
- HIGH-LEVEL COMMANDS (PORCELAIN)
- LOW-LEVEL COMMANDS (PLUMBING)
- CONFIGURATION MECHANISM
- IDENTIFIER TERMINOLOGY
- SYMBOLIC IDENTIFIERS
- FILE/DIRECTORY STRUCTURE
- TERMINOLOGY
- ENVIRONMENT VARIABLES
- DISCUSSION
- THE WORKFLOW
- AUTHORS
- DOCUMENTATION
- GIT
- REFERENCES
git
NAME
git - the stupid content tracker
SYNOPSIS
git [--version] [--exec-path[=GIT_EXEC_PATH]] [-p|--paginate]
[--bare] [--git-dir=GIT_DIR] [--help] COMMAND [ARGS]
DESCRIPTION
Git is a fast, scalable, distributed revision control system with an unusually rich command set that provides both high-level operations and full access to internals.
See this tutorial[1] to get started, then see Everyday Git[2] for a useful minimum set of commands, and "man git-commandname" for documentation of each command. CVS users may also want to read CVS migration[3]. See Git User's Manual[4] for a more in-depth introduction.
The COMMAND is either a name of a Git command (see below) or an alias as defined in the configuration file (see git-config(1)).
Formatted and hyperlinked version of the latest git documentation can be viewed at http://www.kernel.org/pub/software/scm/git/docs/.
OPTIONS
--version
Prints the git suite version that the git program came from.
--help
Prints the synopsis and a list of the most commonly used commands. If a git command is named this option will bring up the man-page for that command. If the option --all or -a is given then all available commands are printed.
--exec-path
Path to wherever your core git programs are installed. This can also be controlled by setting the GIT_EXEC_PATH environment variable. If no path is given git will print the current setting and then exit.
-p|--paginate
Pipe all output into less (or if set, $PAGER).
--git-dir=<path>
Set the path to the repository. This can also be controlled by setting the GIT_DIR environment variable.
--bare
Same as --git-dir=pwd.
FURTHER DOCUMENTATION
See the references above to get started using git. The following is probably more detail than necessary for a first-time user.
The Discussion section below and the Core tutorial[5] both provide introductions to the underlying git architecture.
See also the howto[6] documents for some useful examples.
GIT COMMANDS
We divide git into high level ("porcelain") commands and low level ("plumbing") commands.
HIGH-LEVEL COMMANDS (PORCELAIN)
We separate the porcelain commands into the main commands and some ancillary user utilities.
Main porcelain commands
git-add(1)
Add file contents to the changeset to be committed next.
git-am(1)
Apply a series of patches from a mailbox.
git-archive(1)
Create an archive of files from a named tree.
git-bisect(1)
Find the change that introduced a bug by binary search.
git-branch(1)
List, create, or delete branches.
git-bundle(1)
Move objects and refs by archive.
git-checkout(1)
Checkout and switch to a branch.
git-cherry-pick(1)
Apply the change introduced by an existing commit.
git-clean(1)
Remove untracked files from the working tree.
git-clone(1)
Clone a repository into a new directory.
git-commit(1)
Record changes to the repository.
git-describe(1)
Show the most recent tag that is reachable from a commit.
git-diff(1)
Show changes between commits, commit and working tree, etc.
git-fetch(1)
Download objects and refs from another repository.
git-format-patch(1)
Prepare patches for e-mail submission.
git-gc(1)
Cleanup unnecessary files and optimize the local repository.
git-grep(1)
Print lines matching a pattern.
git-init(1)
Create an empty git repository or reinitialize an existing one.
gitk(1)
The git repository browser.
git-log(1)
Show commit logs.
git-merge(1)
Join two or more development histories together.
git-mv(1)
Move or rename a file, a directory, or a symlink.
git-pull(1)
Fetch from and merge with another repository or a local branch.
git-push(1)
Update remote refs along with associated objects.
git-rebase(1)
Forward-port local commits to the updated upstream head.
git-reset(1)
Reset current HEAD to the specified state.
git-revert(1)
Revert an existing commit.
git-rm(1)
Remove files from the working tree and from the index.
git-shortlog(1)
Summarize git log output.
git-show(1)
Show various types of objects.
git-status(1)
Show the working tree status.
git-tag(1)
git-convert-objects(1)
Converts old-style git repository.
git-fast-import(1)
Backend for fast Git data importers.
git-lost-found(1)
Recover lost refs that luckily have not yet been pruned.
git-mergetool(1)
Run merge conflict resolution tools to resolve merge conflicts.
git-pack-refs(1)
Pack heads and tags for efficient repository access.
git-prune(1)
Prune all unreachable objects from the object database.
git-reflog(1)
Manage reflog information.
git-relink(1)
Hardlink common objects in local repositories.
git-repack(1)
Pack unpacked objects in a repository.
git-config(1)
Get and set repository or global options.
git-remote(1)
manage set of tracked repositories.
Interrogators:
git-annotate(1)
Annotate file lines with commit info.
git-applymbox(1)
Apply a series of patches in a mailbox.
git-blame(1)
Show what revision and author last modified each line of a file.
git-cherry(1)
Find commits not merged upstream.
git-count-objects(1)
Count unpacked number of objects and their disk consumption.
git-fsck(1)
Verifies the connectivity and validity of the objects in the database.
git-get-tar-commit-id(1)
Extract commit ID from an archive created using git-tar-tree.
git-instaweb(1)
Instantly browse your working repository in gitweb.
git-merge-tree(1)
Show three-way merge without touching index.
git-rerere(1)
Reuse recorded resolution of conflicted merges.
git-rev-parse(1)
Pick out and massage parameters.
git-runstatus(1)
A helper for git-status and git-commit.
git-show-branch(1)
Show branches and their commits.
git-verify-tag(1)
Check the GPG signature of tag.
git-whatchanged(1)
git-archimport(1)
Import an Arch repository into git.
git-cvsexportcommit(1)
Export a single commit to a CVS checkout.
git-cvsimport(1)
Salvage your data out of another SCM people love to hate.
git-cvsserver(1)
A CVS server emulator for git.
git-imap-send(1)
Dump a mailbox from stdin into an imap folder.
git-quiltimport(1)
Applies a quilt patchset onto the current branch.
git-request-pull(1)
Generates a summary of pending changes.
git-send-email(1)
Send a collection of patches as emails.
git-svn(1)
Bidirectional operation between a single Subversion branch and git.
git-svnimport(1)
Import a SVN repository into git.
LOW-LEVEL COMMANDS (PLUMBING)
Although git includes its own porcelain layer, its low-level commands are sufficient to support development of alternative porcelains. Developers of such porcelains might start by reading about git-update-index(1) and git-read-tree(1).
The interface (input, output, set of options and the semantics) to these low-level commands are meant to be a lot more stable than Porcelain level commands, because these commands are primarily for scripted use. The interface to Porcelain commands on the other hand are subject to change in order to improve the end user experience.
The following description divides the low-level commands into commands that manipulate objects (in the repository, index, and working tree), commands that interrogate and compare objects, and commands that move objects and references between repositories.
Manipulation commands
git-apply(1)
Apply a patch on a git index file and a working tree.
git-checkout-index(1)
Copy files from the index to the working tree.
git-commit-tree(1)
Create a new commit object.
git-hash-object(1)
Compute object ID and optionally creates a blob from a file.
git-index-pack(1)
Build pack index file for an existing packed archive.
git-merge-file(1)
Run a three-way file merge.
git-merge-index(1)
Run a merge for files needing merging.
git-mktag(1)
Creates a tag object.
git-mktree(1)
Build a tree-object from ls-tree formatted text.
git-pack-objects(1)
Create a packed archive of objects.
git-prune-packed(1)
Remove extra objects that are already in pack files.
git-read-tree(1)
Reads tree information into the index.
git-symbolic-ref(1)
Read and modify symbolic refs.
git-unpack-objects(1)
Unpack objects from a packed archive.
git-update-index(1)
Register file contents in the working tree to the index.
git-update-ref(1)
Update the object name stored in a ref safely.
git-cat-file(1)
Provide content or type/size information for repository objects.
git-diff-files(1)
Compares files in the working tree and the index.
git-diff-index(1)
Compares content and mode of blobs between the index and repository.
git-diff-tree(1)
Compares the content and mode of blobs found via two tree objects.
git-for-each-ref(1)
Output information on each ref.
git-ls-files(1)
Show information about files in the index and the working tree.
git-ls-remote(1)
List references in a remote repository.
git-ls-tree(1)
List the contents of a tree object.
git-merge-base(1)
Find as good common ancestors as possible for a merge.
git-name-rev(1)
Find symbolic names for given revs.
git-pack-redundant(1)
Find redundant pack files.
git-rev-list(1)
Lists commit objects in reverse chronological order.
git-show-index(1)
Show packed archive index.
git-show-ref(1)
List references in a local repository.
git-tar-tree(1)
Create a tar archive of the files in the named tree object.
git-unpack-file(1)
Creates a temporary file with a blob's contents.
git-var(1)
Show a git logical variable.
git-verify-pack(1)
git-daemon(1)
A really simple server for git repositories.
git-fetch-pack(1)
Receive missing objects from another repository.
git-local-fetch(1)
Duplicate another git repository on a local system.
git-send-pack(1)
Push objects over git protocol to another repository.
git-ssh-fetch(1)
Fetch from a remote repository over ssh connection.
git-ssh-upload(1)
Push to a remote repository over ssh connection.
git-update-server-info(1)
Update auxiliary info file to help dumb servers.
The following are helper programs used by the above; end users typically do not use them directly.
git-http-fetch(1)
Download from a remote git repository via HTTP.
git-http-push(1)
Push objects over HTTP/DAV to another repository.
git-parse-remote(1)
Routines to help parsing remote repository access parameters.
git-receive-pack(1)
Receive what is pushed into the repository.
git-shell(1)
Restricted login shell for GIT-only SSH access.
git-upload-archive(1)
Send archive back to git-archive.
git-upload-pack(1)
git-applypatch(1)
Apply one patch extracted from an e-mail.
git-check-attr(1)
Display gitattributes information..
git-check-ref-format(1)
Make sure ref name is well formed.
git-fmt-merge-msg(1)
Produce a merge commit message.
git-mailinfo(1)
Extracts patch and authorship from a single e-mail message.
git-mailsplit(1)
Simple UNIX mbox splitter program.
git-merge-one-file(1)
The standard helper program to use with git-merge-index.
git-patch-id(1)
Compute unique ID for a patch.
git-peek-remote(1)
List the references in a remote repository.
git-sh-setup(1)
Common git shell script setup code.
git-stripspace(1)
Filter out empty lines.
CONFIGURATION MECHANISM
Starting from 0.99.9 (actually mid 0.99.8.GIT), .git/config file is used to hold per-repository configuration options. It is a simple text file modeled after .ini format familiar to some people. Here is an example:
.ft C
#
# A '#' or ';' character indicates a comment.
#
; core variables
[core]
; Don't trust file modes
filemode = false
; user identity
[user]
name = "Junio C Hamano"
email = "junkio@twinsun.com"
.ft
Various commands read from the configuration file and adjust their operation accordingly.
IDENTIFIER TERMINOLOGY
<object>
Indicates the object name for any type of object.
<blob>
Indicates a blob object name.
<tree>
Indicates a tree object name.
<commit>
Indicates a commit object name.
<tree-ish>
Indicates a tree, commit or tag object name. A command that takes a <tree-ish> argument ultimately wants to operate on a <tree> object but automatically dereferences <commit> and <tag> objects that point at a <tree>.
<commit-ish>
Indicates a commit or tag object name. A command that takes a <commit-ish> argument ultimately wants to operate on a <commit> object but automatically dereferences <tag> objects that point at a <commit>.
<type>
Indicates that an object type is required. Currently one of: blob, tree, commit, or tag.
<file>
Indicates a filename - almost always relative to the root of the tree structure GIT_INDEX_FILE describes.
SYMBOLIC IDENTIFIERS
Any git command accepting any <object> can also use the following symbolic notation:
HEAD
indicates the head of the current branch (i.e. the contents of $GIT_DIR/HEAD).
<tag>
a valid tag name (i.e. the contents of $GIT_DIR/refs/tags/<tag>).
<head>
a valid head name (i.e. the contents of $GIT_DIR/refs/heads/<head>).
For a more complete list of ways to spell object names, see "SPECIFYING REVISIONS" section in git-rev-parse(1).
FILE/DIRECTORY STRUCTURE
Please see repository layout[7] document.
Read hooks[8] for more details about each hook.
Higher level SCMs may provide and manage additional information in the $GIT_DIR.
TERMINOLOGY
Please see glossary[9] document.
ENVIRONMENT VARIABLES
Various git commands use the following environment variables:
The git Repository
These environment variables apply to all core git commands. Nb: it is worth noting that they may be used/overridden by SCMS sitting above git so take care if using Cogito etc.GIT_INDEX_FILE
This environment allows the specification of an alternate index file. If not specified, the default of $GIT_DIR/index is used.
GIT_OBJECT_DIRECTORY
If the object storage directory is specified via this environment variable then the sha1 directories are created underneath - otherwise the default $GIT_DIR/objects directory is used.
GIT_ALTERNATE_OBJECT_DIRECTORIES
Due to the immutable nature of git objects, old objects can be archived into shared, read-only directories. This variable specifies a ":" separated list of git object directories which can be used to search for git objects. New objects will not be written to these directories.
GIT_DIR
GIT_AUTHOR_NAME, GIT_AUTHOR_EMAIL, GIT_AUTHOR_DATE, GIT_COMMITTER_NAME, GIT_COMMITTER_EMAIL, GIT_COMMITTER_DATE, EMAIL
GIT_DIFF_OPTS
Only valid setting is "--unified=??" or "-u??" to set the number of context lines shown when a unified diff is created. This takes precedence over any "-U" or "--unified" option value passed on the git diff command line.
GIT_EXTERNAL_DIFF
When the environment variable GIT_EXTERNAL_DIFF is set, the program named by it is called, instead of the diff invocation described above. For a path that is added, removed, or modified, GIT_EXTERNAL_DIFF is called with 7 parameters:
path old-file old-hex old-mode new-file new-hex new-modewhere: tab(:); lt lt lt lt lt lt. T{ <old|new>-file T}:T{ are files GIT_EXTERNAL_DIFF can use to read the contents of <old|new>, T} T{ <old|new>-hex T}:T{ are the 40-hexdigit SHA1 hashes, T} T{ <old|new>-mode T}:T{ are the octal representation of the file modes. T} The file parameters can point at the user's working file (e.g. new-file in "git-diff-files"), /dev/null (e.g. old-file when a new file is added), or a temporary file (e.g. old-file in the index). GIT_EXTERNAL_DIFF should not worry about unlinking the temporary file --- it is removed when GIT_EXTERNAL_DIFF exits. For a path that is unmerged, GIT_EXTERNAL_DIFF is called with 1 parameter, <path>.
other
GIT_PAGER
This environment variable overrides $PAGER.
GIT_TRACE
If this variable is set to "1", "2" or "true" (comparison is case insensitive), git will print trace: messages on stderr telling about alias expansion, built-in command execution and external command execution. If this variable is set to an integer value greater than 1 and lower than 10 (strictly) then git will interpret this value as an open file descriptor and will try to write the trace messages into this file descriptor. Alternatively, if this variable is set to an absolute path (starting with a / character), git will interpret this as a file path and will try to write the trace messages into it.
DISCUSSION
"git" can mean anything, depending on your mood.
\h'-04'\h'+03'random three-letter combination that is pronounceable, and not actually used by any common UNIX command. The fact that it is a mispronunciation of "get" may or may not be relevant.
\h'-04'\h'+03'stupid. contemptible and despicable. simple. Take your pick from the dictionary of slang.
\h'-04'\h'+03'"global information tracker": you're in a good mood, and it actually works for you. Angels sing, and a light suddenly fills the room.
\h'-04'\h'+03'"goddamn idiotic truckload of sh*t": when it breaks
This is a (not so) stupid but extremely fast directory content manager. It doesn't do a whole lot at its core, but what it does do is track directory contents efficiently.
There are two object abstractions: the "object database", and the "current directory cache" aka "index".
The Object Database
The object database is literally just a content-addressable collection of objects. All objects are named by their content, which is approximated by the SHA1 hash of the object itself. Objects may refer to other objects (by referencing their SHA1 hash), and so you can build up a hierarchy of objects. All objects have a statically determined "type" aka "tag", which is determined at object creation time, and which identifies the format of the object (i.e. how it is used, and how it can refer to other objects). There are currently four different object types: "blob", "tree", "commit" and "tag". A "blob" object cannot refer to any other object, and is, like the type implies, a pure storage object containing some user data. It is used to actually store the file data, i.e. a blob object is associated with some particular version of some file. A "tree" object is an object that ties one or more "blob" objects into a directory structure. In addition, a tree object can refer to other tree objects, thus creating a directory hierarchy. A "commit" object ties such directory hierarchies together into a DAG of revisions - each "commit" is associated with exactly one tree (the directory hierarchy at the time of the commit). In addition, a "commit" refers to one or more "parent" commit objects that describe the history of how we arrived at that directory hierarchy. As a special case, a commit object with no parents is called the "root" object, and is the point of an initial project commit. Each project must have at least one root, and while you can tie several different root objects together into one project by creating a commit object which has two or more separate roots as its ultimate parents, that's probably just going to confuse people. So aim for the notion of "one root object per project", even if git itself does not enforce that. A "tag" object symbolically identifies and can be used to sign other objects. It contains the identifier and type of another object, a symbolic name (of course!) and, optionally, a signature. Regardless of object type, all objects share the following characteristics: they are all deflated with zlib, and have a header that not only specifies their type, but also provides size information about the data in the object. It's worth noting that the SHA1 hash that is used to name the object is the hash of the original data plus this header, so sha1sum file does not match the object name for file. (Historical note: in the dawn of the age of git the hash was the sha1 of the compressed object.) As a result, the general consistency of an object can always be tested independently of the contents or the type of the object: all objects can be validated by verifying that (a) their hashes match the content of the file and (b) the object successfully inflates to a stream of bytes that forms a sequence of <ascii type without space> + <space> + <ascii decimal size> + <byte\0> + <binary object data>. The structured objects can further have their structure and connectivity to other objects verified. This is generally done with the git-fsck program, which generates a full dependency graph of all objects, and verifies their internal consistency (in addition to just verifying their superficial consistency through the hash). The object types in some more detail:Blob Object
A "blob" object is nothing but a binary blob of data, and doesn't refer to anything else. There is no signature or any other verification of the data, so while the object is consistent (it is indexed by its sha1 hash, so the data itself is certainly correct), it has absolutely no other attributes. No name associations, no permissions. It is purely a blob of data (i.e. normally "file contents"). In particular, since the blob is entirely defined by its data, if two files in a directory tree (or in multiple different versions of the repository) have the same contents, they will share the same blob object. The object is totally independent of its location in the directory tree, and renaming a file does not change the object that file is associated with in any way. A blob is typically created when git-update-index(1) (or git-add(1)) is run, and its data can be accessed by git-cat-file(1).Tree Object
The next hierarchical object type is the "tree" object. A tree object is a list of mode/name/blob data, sorted by name. Alternatively, the mode data may specify a directory mode, in which case instead of naming a blob, that name is associated with another TREE object. Like the "blob" object, a tree object is uniquely determined by the set contents, and so two separate but identical trees will always share the exact same object. This is true at all levels, i.e. it's true for a "leaf" tree (which does not refer to any other trees, only blobs) as well as for a whole subdirectory. For that reason a "tree" object is just a pure data abstraction: it has no history, no signatures, no verification of validity, except that since the contents are again protected by the hash itself, we can trust that the tree is immutable and its contents never change. So you can trust the contents of a tree to be valid, the same way you can trust the contents of a blob, but you don't know where those contents came from. Side note on trees: since a "tree" object is a sorted list of "filename+content", you can create a diff between two trees without actually having to unpack two trees. Just ignore all common parts, and your diff will look right. In other words, you can effectively (and efficiently) tell the difference between any two random trees by O(n) where "n" is the size of the difference, rather than the size of the tree. Side note 2 on trees: since the name of a "blob" depends entirely and exclusively on its contents (i.e. there are no names or permissions involved), you can see trivial renames or permission changes by noticing that the blob stayed the same. However, renames with data changes need a smarter "diff" implementation. A tree is created with git-write-tree(1) and its data can be accessed by git-ls-tree(1). Two trees can be compared with git-diff-tree(1).Commit Object
The "commit" object is an object that introduces the notion of history into the picture. In contrast to the other objects, it doesn't just describe the physical state of a tree, it describes how we got there, and why. A "commit" is defined by the tree-object that it results in, the parent commits (zero, one or more) that led up to that point, and a comment on what happened. Again, a commit is not trusted per se: the contents are well-defined and "safe" due to the cryptographically strong signatures at all levels, but there is no reason to believe that the tree is "good" or that the merge information makes sense. The parents do not have to actually have any relationship with the result, for example. Note on commits: unlike real SCM's, commits do not contain rename information or file mode change information. All of that is implicit in the trees involved (the result tree, and the result trees of the parents), and describing that makes no sense in this idiotic file manager. A commit is created with git-commit-tree(1) and its data can be accessed by git-cat-file(1).Trust
An aside on the notion of "trust". Trust is really outside the scope of "git", but it's worth noting a few things. First off, since everything is hashed with SHA1, you can trust that an object is intact and has not been messed with by external sources. So the name of an object uniquely identifies a known state - just not a state that you may want to trust. Furthermore, since the SHA1 signature of a commit refers to the SHA1 signatures of the tree it is associated with and the signatures of the parent, a single named commit specifies uniquely a whole set of history, with full contents. You can't later fake any step of the way once you have the name of a commit. So to introduce some real trust in the system, the only thing you need to do is to digitally sign just one special note, which includes the name of a top-level commit. Your digital signature shows others that you trust that commit, and the immutability of the history of commits tells others that they can trust the whole history. In other words, you can easily validate a whole archive by just sending out a single email that tells the people the name (SHA1 hash) of the top commit, and digitally sign that email using something like GPG/PGP. To assist in this, git also provides the tag object...Tag Object
Git provides the "tag" object to simplify creating, managing and exchanging symbolic and signed tokens. The "tag" object at its simplest simply symbolically identifies another object by containing the sha1, type and symbolic name. However it can optionally contain additional signature information (which git doesn't care about as long as there's less than 8k of it). This can then be verified externally to git. Note that despite the tag features, "git" itself only handles content integrity; the trust framework (and signature provision and verification) has to come from outside. A tag is created with git-mktag(1), its data can be accessed by git-cat-file(1), and the signature can be verified by git-verify-tag(1). The index is a simple binary file, which contains an efficient representation of a virtual directory content at some random time. It does so by a simple array that associates a set of names, dates, permissions and content (aka "blob") objects together. The cache is always kept ordered by name, and names are unique (with a few very specific rules) at any point in time, but the cache has no long-term meaning, and can be partially updated at any time. In particular, the index certainly does not need to be consistent with the current directory contents (in fact, most operations will depend on different ways to make the index not be consistent with the directory hierarchy), but it has three very important attributes: (a) it can re-generate the full state it caches (not just the directory structure: it contains pointers to the "blob" objects so that it can regenerate the data too) As a special case, there is a clear and unambiguous one-way mapping from a current directory cache to a "tree object", which can be efficiently created from just the current directory cache without actually looking at any other data. So a directory cache at any one time uniquely specifies one and only one "tree" object (but has additional data to make it easy to match up that tree object with what has happened in the directory) (b) it has efficient methods for finding inconsistencies between that cached state ("tree object waiting to be instantiated") and the current state. (c) it can additionally efficiently represent information about merge conflicts between different tree objects, allowing each pathname to be associated with sufficient information about the trees involved that you can create a three-way merge between them. Those are the three ONLY things that the directory cache does. It's a cache, and the normal operation is to re-generate it completely from a known tree object, or update/compare it with a live tree that is being developed. If you blow the directory cache away entirely, you generally haven't lost any information as long as you have the name of the tree that it described. At the same time, the index is at the same time also the staging area for creating new trees, and creating a new tree always involves a controlled modification of the index file. In particular, the index file can have the representation of an intermediate tree that has not yet been instantiated. So the index can be thought of as a write-back cache, which can contain dirty information that has not yet been written back to the backing store.THE WORKFLOW
Generally, all "git" operations work on the index file. Some operations work purely on the index file (showing the current state of the index), but most operations move data to and from the index file. Either from the database or from the working directory. Thus there are four main combinations:
1) working directory -> index
You update the index with information from the working directory with the git-update-index(1) command. You generally update the index information by just specifying the filename you want to update, like so:git-update-index filenamebut to avoid common mistakes with filename globbing etc, the command will not normally add totally new entries or remove old entries, i.e. it will normally just update existing cache entries. To tell git that yes, you really do realize that certain files no longer exist, or that new files should be added, you should use the --remove and --add flags respectively. NOTE! A --remove flag does not mean that subsequent filenames will necessarily be removed: if the files still exist in your directory structure, the index will be updated with their new status, not removed. The only thing --remove means is that update-cache will be considering a removed file to be a valid thing, and if the file really does not exist any more, it will update the index accordingly. As a special case, you can also do git-update-index --refresh, which will refresh the "stat" information of each index to match the current stat information. It will not update the object status itself, and it will only update the fields that are used to quickly test whether an object still matches its old backing store object.
2) index -> object database
You write your current index file to a "tree" object with the programgit-write-treethat doesn't come with any options - it will just write out the current index into the set of tree objects that describe that state, and it will return the name of the resulting top-level tree. You can use that tree to re-generate the index at any time by going in the other direction:
3) object database -> index
You read a "tree" file from the object database, and use that to populate (and overwrite - don't do this if your index contains any unsaved state that you might want to restore later!) your current index. Normal operation is justgit-read-tree <sha1 of tree>and your index file will now be equivalent to the tree that you saved earlier. However, that is only your index file: your working directory contents have not been modified.
4) index -> working directory
You update your working directory from the index by "checking out" files. This is not a very common operation, since normally you'd just keep your files updated, and rather than write to your working directory, you'd tell the index files about the changes in your working directory (i.e. git-update-index). However, if you decide to jump to a new version, or check out somebody else's version, or just restore a previous tree, you'd populate your index file with read-tree, and then you need to check out the result withgit-checkout-index filenameor, if you want to check out all of the index, use -a. NOTE! git-checkout-index normally refuses to overwrite old files, so if you have an old version of the tree already checked out, you will need to use the "-f" flag (before the "-a" flag or the filename) to force the checkout. Finally, there are a few odds and ends which are not purely moving from one representation to the other:
5) Tying it all together
To commit a tree you have instantiated with "git-write-tree", you'd create a "commit" object that refers to that tree and the history behind it - most notably the "parent" commits that preceded it in history. Normally a "commit" has one parent: the previous state of the tree before a certain change was made. However, sometimes it can have two or more parent commits, in which case we call it a "merge", due to the fact that such a commit brings together ("merges") two or more previous states represented by other commits. In other words, while a "tree" represents a particular directory state of a working directory, a "commit" represents that state in "time", and explains how we got there. You create a commit object by giving it the tree that describes the state at the time of the commit, and a list of parents:git-commit-tree <tree> -p <parent> [-p <parent2> ..]and then giving the reason for the commit on stdin (either through redirection from a pipe or file, or by just typing it at the tty). git-commit-tree will return the name of the object that represents that commit, and you should save it away for later use. Normally, you'd commit a new HEAD state, and while git doesn't care where you save the note about that state, in practice we tend to just write the result to the file pointed at by .git/HEAD, so that we can always see what the last committed state was. Here is an ASCII art by Jon Loeliger that illustrates how various pieces fit together.
.ft C
commit-tree
commit obj
+----+
| |
| |
V V
+-----------+
| Object DB |
| Backing |
| Store |
+-----------+
^
write-tree | |
tree obj | |
| | read-tree
| | tree obj
V
+-----------+
| Index |
| "cache" |
+-----------+
update-index ^
blob obj | |
| |
checkout-index -u | | checkout-index
stat | | blob obj
V
+-----------+
| Working |
| Directory |
+-----------+
.ft
6) Examining the data
You can examine the data represented in the object database and the index with various helper tools. For every object, you can use git-cat-file(1) to examine details about the object:git-cat-file -t <objectname>shows the type of the object, and once you have the type (which is usually implicit in where you find the object), you can use
git-cat-file blob|tree|commit|tag <objectname>to show its contents. NOTE! Trees have binary content, and as a result there is a special helper for showing that content, called git-ls-tree, which turns the binary content into a more easily readable form. It's especially instructive to look at "commit" objects, since those tend to be small and fairly self-explanatory. In particular, if you follow the convention of having the top commit name in .git/HEAD, you can do
git-cat-file commit HEADto see what the top commit was.
7) Merging multiple trees
Git helps you do a three-way merge, which you can expand to n-way by repeating the merge procedure arbitrary times until you finally "commit" the state. The normal situation is that you'd only do one three-way merge (two parents), and commit it, but if you like to, you can do multiple parents in one go. To do a three-way merge, you need the two sets of "commit" objects that you want to merge, use those to find the closest common parent (a third "commit" object), and then use those commit objects to find the state of the directory ("tree" object) at these points. To get the "base" for the merge, you first look up the common parent of two commits withgit-merge-base <commit1> <commit2>which will return you the commit they are both based on. You should now look up the "tree" objects of those commits, which you can easily do with (for example)
git-cat-file commit <commitname> | head -1since the tree object information is always the first line in a commit object. Once you know the three trees you are going to merge (the one "original" tree, aka the common case, and the two "result" trees, aka the branches you want to merge), you do a "merge" read into the index. This will complain if it has to throw away your old index contents, so you should make sure that you've committed those - in fact you would normally always do a merge against your last commit (which should thus match what you have in your current index anyway). To do the merge, do
git-read-tree -m -u <origtree> <yourtree> <targettree>which will do all trivial merge operations for you directly in the index file, and you can just write the result out with git-write-tree. Historical note. We did not have -u facility when this section was first written, so we used to warn that the merge is done in the index file, not in your working tree, and your working tree will not match your index after this step. This is no longer true. The above command, thanks to -u option, updates your working tree with the merge results for paths that have been trivially merged.
8) Merging multiple trees, continued
Sadly, many merges aren't trivial. If there are files that have been added.moved or removed, or if both branches have modified the same file, you will be left with an index tree that contains "merge entries" in it. Such an index tree can NOT be written out to a tree object, and you will have to resolve any such merge clashes using other tools before you can write out the result. You can examine such index state with git-ls-files --unmerged command. An example:.ft C $ git-read-tree -m $orig HEAD $target $ git-ls-files --unmerged 100644 263414f423d0e4d70dae8fe53fa34614ff3e2860 1 hello.c 100644 06fa6a24256dc7e560efa5687fa84b51f0263c3a 2 hello.c 100644 cc44c73eb783565da5831b4d820c962954019b69 3 hello.c .ftEach line of the git-ls-files --unmerged output begins with the blob mode bits, blob SHA1, stage number, and the filename. The stage number is git's way to say which tree it came from: stage 1 corresponds to $orig tree, stage 2 HEAD tree, and stage3 $target tree. Earlier we said that trivial merges are done inside git-read-tree -m. For example, if the file did not change from $orig to HEAD nor $target, or if the file changed from $orig to HEAD and $orig to $target the same way, obviously the final outcome is what is in HEAD. What the above example shows is that file hello.c was changed from $orig to HEAD and $orig to $target in a different way. You could resolve this by running your favorite 3-way merge program, e.g. diff3 or merge, on the blob objects from these three stages yourself, like this:
.ft C $ git-cat-file blob 263414f... >hello.c~1 $ git-cat-file blob 06fa6a2... >hello.c~2 $ git-cat-file blob cc44c73... >hello.c~3 $ merge hello.c~2 hello.c~1 hello.c~3 .ftThis would leave the merge result in hello.c~2 file, along with conflict markers if there are conflicts. After verifying the merge result makes sense, you can tell git what the final merge result for this file is by:
mv -f hello.c~2 hello.c git-update-index hello.cWhen a path is in unmerged state, running git-update-index for that path tells git to mark the path resolved. The above is the description of a git merge at the lowest level, to help you understand what conceptually happens under the hood. In practice, nobody, not even git itself, uses three git-cat-file for this. There is git-merge-index program that extracts the stages to temporary files and calls a "merge" script on it:
git-merge-index git-merge-one-file hello.cand that is what higher level git merge -s resolve is implemented with.
AUTHORS
\h'-04'\h'+03'git's founding father is Linus Torvalds <torvalds@osdl.org>.
\h'-04'\h'+03'The current git nurse is Junio C Hamano <junkio@cox.net>.
\h'-04'\h'+03'The git potty was written by Andres Ericsson <ae@op5.se>.
\h'-04'\h'+03'General upbringing is handled by the git-list <git@vger.kernel.org>.
DOCUMENTATION
The documentation for git suite was started by David Greaves <david@dgreaves.com>, and later enhanced greatly by the contributors on the git-list <git@vger.kernel.org>.
GIT
Part of the git(7) suite
REFERENCES
"
tutorial
tutorial.html
"
Everyday Git
everyday.html
"
CVS migration
cvs-migration.html
"
Git User's Manual
user-manual.html
"
Core tutorial
core-tutorial.html
"
howto
howto-index.html
"
repository layout
repository-layout.html
"
hooks
hooks.html
"
glossary
glossary.html
ČLÁNKY DO MAILU